Openings in block or concrete walls
A new door, window or pass-through starts with a clean saw cut, which leaves square edges and keeps the rest of the wall from cracking the way hammering it out can.
Concrete cutting in Long Beach CA - clean edges right where you marked them
Need a section of slab or wall opened up or taken out? We cut along the lines you approve and keep the dust down.
- Fully licensed and insured.
- Free on-site estimates.
- Replies within 1 business day.
What concrete cutting involves on your property
Concrete cutting in Long Beach means sawing, coring or drilling through a slab or wall with powered tools, so you get a clean opening or a damaged section out without breaking up more concrete than you need. Most of the planning happens before the saw ever starts.
Maybe you need a doorway through a block wall, a trench across the garage floor or one cracked driveway panel taken out without disturbing the rest. The price mostly moves with how thick the concrete is, whether it holds rebar, the steel bars that hold a slab together, or tensioned cables, how much cutting there is, and whether we're working indoors or in a tight spot. The schedule usually turns on how quickly building records, a scan or a permit come through. Long Beach requires permits and inspections for most building work, including alterations, replacements and repairs, so before I price your job I check with the city's permit office about what it calls for, and when a permit is needed we handle the application and meet the inspector on site.
Years of fixing other people's shortcuts
Before I started this company in Long Beach in 2021, I spent years repairing cracked walks and tired slabs for a property management company, so I plan every cut around who lives with it afterward.
Our own crew runs the saw
The people cutting your concrete work for us, not a crew brought in for the day, so the person who planned the job can answer for how it went.
Straight answers, or I'll find out
If I can't tell you something for certain, I'll say so and check before we go further, or point you to the office that can answer it. Guessing is how cuts go wrong.
How we plan, cut and clean up
I start by coming out to look at the wall or slab and talk through what you want opened up or removed. Before the saw starts, we go over the marked cut lines with you and ask about anything set inside the concrete, because a pipe, a conduit or a run of steel in the wrong place changes where and how we cut. On slabs that may hold tensioned cables, we ask for the building records and a scan of the exact spot we'll cut. While we work, we control the dust and keep the slurry, the gray water and grit that sawing leaves behind, out of the drains, and then we lift out the pieces and clean up the edges and the work area.
Most cuts lead to new concrete. A cracked panel cut out of a driveway gets filled back in as part of concrete driveway building, and a straight, clean edge is often how we tie new work into an old slab for concrete patio construction. When we pour back into an opening, I'd rather spend your budget on the subgrade, the packed ground the slab sits on, than on a fancier surface, because a patch sitting on loose dirt settles and cracks however nice it looked the first day. I'm usually there for the pour, and the same saws cut control joints, the shallow grooves that give new concrete a planned place to crack.
Common reasons to cut concrete
Removing a damaged section of slab
When one panel of a driveway, walk or patio has sunk or cracked, cutting it out along straight lines lets you replace that piece instead of tearing out the whole slab.
Trenches across a floor
A new drain or pipe run under a garage floor or a house slab usually means sawing a narrow trench, so only the strip the plumber needs gets opened up.
Cored holes for pipes and vents
Coring drills a round, clean hole through a slab or wall for a pipe, vent or conduit, so the hole fits closely and the concrete around it stays sound.
Get a written estimate for your cut
Send the form and we'll reply within one business day to set a time for me to look at the job. The estimate is free, written out clearly, with no pressure to book.
Where the cut is
We work across Long Beach and many of the cities around it, so give us the address, whether it's a wall or a slab, and whether the cut is indoors or out.
Your marked or approved cut area
If the area is already marked or approved, say so, along with anything you know is set in the concrete near it. That saves a step when I come out.
Any building records you have
Plans or structural records matter most on slabs that may hold tensioned cables, so please find them if you can. If you can't, tell us and we'll talk it through.
Concrete work examples worth talking over
These photos show saw-cut edges, driveway and patio slabs and finish textures you can point to when we talk about your own job.
Questions about concrete cutting in Long Beach
Here are practical answers on marking cut lines, tensioned cables, dust, licensing, permits and the hours a saw can run in Long Beach.
Who is supposed to mark the cut lines before concrete cutting?
The property owner or the contractor who hired the cutter marks them. One trade group's sawing guidelines make the owner or hiring contractor responsible for having the cut area reviewed, approved and clearly marked. The same guidelines leave it to you whether over cuts, short saw marks that run past a corner, are allowed, so ask us what they would mean for your wall or slab.
What happens if my slab has post-tension cables?
The plan changes, because one scanning firm's guide says those cables, steel strands pulled tight inside the slab, carry stored force, and cutting one can damage the structure or release tension near the people working. Owners of these slabs gather the structural records and plan for a professional scan of the exact work area before any cut, which is why we ask for both.
Is the dust from cutting concrete dangerous?
It can be, because California's workplace safety rules list silicosis, lung cancer, chronic obstructive lung disease and reduced lung function as hazards of breathing too much of it. The state requires a dust reduction system when powered tools cut, core or drill concrete, unless air sampling reliably shows exposure within set limits, so ask any crew how it controls dust.
Does concrete cutting fall under a contractor license in California?
Yes, the state's contractor licensing board describes a concrete-related services contractor as one who does concrete sawing, breaking and coring work. That's worth knowing when you compare bids, because it shows cutting is its own licensed line of work in California. We're fully licensed and insured.
Who can get a building permit for concrete work in Long Beach?
A licensed contractor can, and in some cases so can you. Long Beach's Development Permit Center issues permits to contractors with a valid California State Contractor's License and an active Long Beach Business License, and the owner of a one- or two-family home may qualify under a city eligibility bulletin. Work in the street or on other public property needs a permit from Long Beach Public Works.
What hours can a crew cut concrete in Long Beach?
Outside the Harbor District, city code lets construction that needs a permit run from 7 a.m. to 7 p.m. on weekdays and from 9 a.m. to 6 p.m. on Saturdays. A concrete saw is loud, so on a permitted job that window shapes which days we can book the cutting.
Call us before the saw starts
If your job needs a permit or a scan, calling early gives both time to happen before the day you need the cut.